Anchor UHF-EXT500-B Panduan Pemilik - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem mikrofon Anchor UHF-EXT500-B. Anchor UHF-EXT500-B 19 halaman.

BASIC SYSTEM OPERATION - WR-EXT500

Front Panel

1. Power Button

2. LCD Display: Display channel, frequency and settings

3. Button

: Tap the channel forward/backward

4. SYNC Button: Press the button to actuate the synchronization with the

transmitter

5. SET Button: Press button to activate the manual or auto-scan or preset mode

6. Volume Controller: Adjust the receiver output level

LCD Display

1. MANUAL: Use this mode to select free channel manually

2. SCAN: Use this mode to set free channel by auto-scan function

3. PRESET: Use this mode to set multiple constructions by preset group

4. SYNC: The synchronization process is actuated

5. GP: Display selected preset group

6. CH: Display selected preset channel

7. CH: Display selected channel number

8. FREQ: Display selected frequency

9. MUTE: Audio output is muted

10. RF Bar: Display the reception status of RF signal

11. AF Bar: Display the reception status of AF signal

Rear Back Panel

1. Antenna

2. Balanced XLR Audio Output

3. Unbalanced 1/4" Audio Output

4. Mic/Line Switch: Use this to adjust audio output level for mic level (-20 dB)

or line level (0 dB)

5. Squelch: turn the knob to adjust or decrease the noise floor level

6. Power Adapter Connector

3 4

10 11

5 6