Dreamland N3907 Petunjuk Penggunaan Manual - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan Manual untuk Pemanas Dreamland N3907. Dreamland N3907 12 halaman. Intelliheat easy fit heated underblanket
Juga untuk Dreamland N3907: Panduan Petunjuk Pengoperasian (12 halaman), Panduan Petunjuk Pengoperasian (12 halaman)

Dreamland N3907 Petunjuk Penggunaan Manual
CONNECTING THE CONTROL(S) TO THE BLANKET
Place the connector of the control unit through the triangle opening that you will find
on the side of the elasticated skirt, see diagram [B]. Then join the connector (1) that
is attached to the blanket, to the control unit (2).
Ensure the connector is pushed fully home until the locking catch engages (see
diagram [B]).
Dual Control - Repeat the above procedure to connect the control to the other side
of the blanket.
Now cover your heated mattress protector with a top sheet and duvet.
Your Dreamland Boutique Hotel Intelliheat mattress protector is designed to FAST
PREHEAT your bed and it also responds to temperature changes while you sleep.
The digital intelliheat control has 6 temperature settings:
READY FOR BED temperature to pre-heat the bed
1-5 temperatures for night-time or continuous use
Connect the control connector into the blanket socket then plug into the mains socket.
Switch on your Intelliheat mattress protector from the back of the control (11) Diagram
[C], by positioning the switch ON (I). The temperature setting (4) Diagram [C] will
default to the last one used, providing it has been set to that number for a period
longer than 5 minutes.
TO HEAT UP YOUR INTELLIHEAT MATTRESS PROTECTOR, YOU MUST
ALWAYS PRESS THE READY FOR BED FAST PREHEAT BUTTON.
READY FOR BED FAST PREHEAT: Press the Ready for Bed, fast pre-heat
button on the front of the control (8) Diagram [C]. The setting (5) (Diagram C)
will be illuminated in red on your LED Display (3) (Diagram C). Your blanket will
be lovely and warm in just 5 minutes.
IMPORTANT: The time required to heat the mattress protector may vary
depending on the room temperature. To judge the temperature accurately,
lie in the bed with the covers draped over you. Do not rely on a hand placed
on the bed.
TO SET FOR ALL NIGHT USE: RELEASE the Ready for Bed fast pre-heat
button, and press the temperature button (9) Diagram [C] to select your
preferred all night temperature setting from 1 (min) to 5 (max). The higher the
number, the higher the temperature. This will be illuminated in orange on the
(3) LED display (4) (Diagram C).
EN
5