DreamLED SPL-1000 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Lampu luar ruangan DreamLED SPL-1000. DreamLED SPL-1000 20 halaman. Solar path led light

INSTALLATION

This lamp is intended only for outside use.

Choose a stable, solid and supportive surface and make sure the lamp is mounted with

the solar panel faced towards the sun. Mounting height is 3~5 meters.

There are 2 installation options:

1.Wall mount

Using the supplied normal screws

for wall panels or using the supplied

expansion screws for brick walls

135°

•

Use the supplied screwdriver (side with the torx screwdriver) to loosen the bracket.

Adjust the bracket to the appropriate angle and fix the screw tightly.

•

Pull out the light panel and adjust it to the preferred lighting angle. Fix the screw

tightly with the supplied screwdriver (side with the normal screw driver).

•

Fix the lamp onto the wall or pole using the correct mounting parts.

MOTION SENSOR RANGE

The SPL-1000 has 2 motion sensors, one on each side of the lamp. Complete detection

area is 180°. Actual range of the motion detection sensor depends on mounting height.

OPERATION

The SPL-1000 has 3 lighting modes, which can be selected using the Mode buttons.

ON/OFF BUTTON: LIGHT ON/OFF

360°

2.Pole mount

Using the supplied pole mount part

360°

135°

-4-