Andersen 400 Series Ubah Manual - Halaman 2
Jelajahi secara online atau unduh pdf Ubah Manual untuk Kunci Andersen 400 Series. Andersen 400 Series 2 halaman. Lock mechanism
Juga untuk Andersen 400 Series: Manual Instalasi dan Penghapusan (2 halaman), Panduan Memulai Cepat (6 halaman), Penyesuaian (4 halaman)
Halaman Cetak
1. Pop Out Latch
• Remove white packing clip covering latch.
• Insert a 1/8" flat blade screwdriver into Latch Reversal
Hole until it bottoms out.
• Apply downward pressure on screwdriver handle while
pulling Latch up and out, as shown.
• Remove screwdriver from Latch Reversal Hole.
• Handing of lock can now be changed.
2. Rotate Latch
• Grasp Latch, pull outward slightly, and rotate 180°.
Position Latch so that sloped portion contacts Latch
Receiver first.
• Push Latch back into Lock Mechanism Housing.
▶
Lock mechanism handing change procedure is complete.
Latch Reversal Hole
Flat Blade Screwdriver
Up
Latch
2
Lock Mechanism Handing Change Guide
Latch
Latch
Lock
Mechanism
Housing