DREAMS HouseBeautiful Grove Bed Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Perabotan Dalam Ruangan DREAMS HouseBeautiful Grove Bed. DREAMS HouseBeautiful Grove Bed 20 halaman.

Halaman Cetak
Ottoman assembly
Use pack 'B'
8
Carefully lay frame down making sure there
is an even gap all round as in the sketch.
Use pack 'B'
9
1
for M8 bolt
Hold frame securely then tighten all six
bolt sets 100% using spanner(7) & Allen key (1).
Grove Bed - Assembly Guide - Page 10
x1pc
7
x1pc
for M8 bolt
Note: Be very careful what you store
under the bed -the top of an item, like
a suitcase or a box must nottouch the
slats or they may be damaged. Maximum
storage height is 240mm.
During this next step, the assistant should hold up
the slat frame.
On side panels (C) slide gas-lift piston stems (X)
onto the axles (Y) then fit the flange lock-nuts (10).
Tighten nuts with spanner (7) . BUT DO NOT
over-tighten. A small gap is left so stems can
move freely - this is important - see sketch below.
X
10
Y
7
7
x1pc
for M8 bolt
10
x2pcs
for M8 bolt
!
SMALL GAP