ANDI WMA 7612 L Pembongkaran - Halaman 6

Jelajahi secara online atau unduh pdf Pembongkaran untuk Mesin cuci ANDI WMA 7612 L. ANDI WMA 7612 L 14 halaman.

11- BELLOW (from the tub)

• Remove the front panel. ( figure 3, 4, 5 )

• Remove the spring clamp that fixes the bellows to the tub cover.

• Pull off the bellows. ( When remounting, the bellows holes should look at the

lower part of the tub cover ).

second time, use a new bolt during reassembly.

Figure 6

14- DRUM GROUP

• Remove the front panel. ( Figure 3, 4, 5 )

• Remove the tub cover.

• Remove the rear cover.

• Pulley is disassembled. ( Figure 6)

• Drum is pulled off the tub.

15- MOTOR

• Remove the back cover.

• Motor socket is unplugged from the motor.

• Poly-V belt is removed. ( Figure 6)

• Remove the bolt that attaches the motor to the tub.

• Motor is released from the motor fixture rubber.

12- POLY-V BELT

• Remove the back cover.

• Poly-V belt is pulled off while turning the

pulley. ( Figure 6)

• Clean the pulley before reassembly.

13- PULLEY

• Remove the back cover.

• Remove the poly-V belt. ( Figure 6 )

• Remove the bolt that connects the pulley

to the tub shaft. ( Figure 6)

• Pull off the pulley from the tub shaft.

• Pulley bolt can not be used for the