ANDI WMA 7612 L Pembongkaran - Halaman 8

Jelajahi secara online atau unduh pdf Pembongkaran untuk Mesin cuci ANDI WMA 7612 L. ANDI WMA 7612 L 14 halaman.

20- DRAIN HOSE

• Remove kick plate,front panel,top plate and rear panel.

• Remove spring clamp from the pump connection, cut out the plastic clamp

securing the drain hose to the cabinet. (Pay attention to the remaining water

inside the hose)

• Take out the drain hose holder from the cabinet and pull out the drain hose.

21- PUMP

• Remove the front panel. ( figure 3, 4, 5 )

• Disconnect pump cables.

• Remove tub filter hose.

• Remove drain hose.

• Remove the screws that attaches the pump to the body.

• Turn the pump and remove.

• Remove the drawer from the detergent box. ( figure 8 )

• Remove the screw that attaches the panel to the panel holder. ( figure 8a )

• Release the control panel from the snaps on the panel holder. ( figure 8b )

Figure 8

Figure 9