Advanced micro peripherals DVICOMP-IS Panduan Referensi Perangkat Keras - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Referensi Perangkat Keras untuk Perangkat Keras Komputer Advanced micro peripherals DVICOMP-IS. Advanced micro peripherals DVICOMP-IS 17 halaman. Dvi to composite scan converter board

Halaman Cetak

1: Introduction

Ordering information

The following part number(s) can be used when ordering:

DVICOMP-IS-P

DVICOMP-IS-N

DVICOMP-IS-P-EXT PAL output (-40°C to +85°C)

DVICOMP-IS-N-EXT NTSC output (-40°C to +85°C)

Cable-ST-MMCX-TO-BNC-S

Cable-STANAG/TMDS

Anti-static handling

The board(s) supplied contain electrostatic components that are susceptible to

permanent damage from electrostatic discharge (static electricity). To prevent

electrostatic discharge, the boards are supplied in anti-static packaging.

When handling a board, observe the following anti-static precautions to alleviate

risk of damage:

▪

Remove the board(s) from the packaging only when you are working on an

anti-static, earthed surface and wearing an anti-static wrist strap.

▪

Retain the anti-static packaging that the board(s) were supplied in. If you

remove a board from a system, store it in this packaging.

RoHS compliance

The European RoHS Directive (Restriction on the use of certain Hazardous

Substances – Directive 2002/95/EC) limits the amount of six specific substances

within the composition of the product. The DVICOMP-IS is RoHS compliant.

Document version A.01

DVICOMP-IS Hardware Reference Manual

PAL output

NTSC/RS-170A output

Composite output cable (MMCX to BNC)

TMDS input cable (flat flex to DVI)