Andonstar 249 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mikroskop Andonstar 249. Andonstar 249 14 halaman.
Juga untuk Andonstar 249: Panduan Pengguna (14 halaman)

Halaman Cetak

Date/Time Setting

Select "Date/Time" in setting menu, press OK button to get in time setting. Use "up"and

"down" button to select correct number, OK to confirm and jump to the next one. After it's all

done, press M to back to setting menu.

Save Setting

In order to let the microscope memorize the setting changes, please turn off the microscope by

PRESSING THE POWER BUTTON ON THE MONITOR (press and hold until it switch off).

Setting changes won't be saved if you switch off the device in other ways.

Trouble shooting

1.The microscope can't be switched on.

Please check the connection is exactly as pic 4 shows, power supply is strong enough (5V 2A & above)

and stable. If the device still can be not switched on, please pin the reset hole at the back side of

monitor.

2.Images are not clear.

Please confirm the illumination work properly, and shine directly to the surface of the specimen.

Adjust the height of the boom arm, or the secondary bracket lift to change the distance from the lens

to the specimen, and turn the focusing tube properly. If the image is still blurry, please clean the

bottom of the lens use a piece of clean and soft cloth.

3. Setting changes can't be memorized.

After changing settings, press and hold the button on the monitor to switch off the device. DO NOT

cut off the power supply directly or use the dimmer cable to switch off the device.

4.The microscope reboots repeatedly.

Please check the if the cable connection is firm and if the power supply is stable and strong enough.

Please check your power adapter is high quality 5V 2A.

4. It shows "card error" or "card is full" after inserting memory card to the device.

Please format the card after insert it into the device.（Format steps refer to chapter "Save files to

micro SD card")

PS：If there are other questions or problems, please contact us as soon as possible, we will do

our best to help! Thanks for your support!