AirTech 70-112B Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radio AirTech 70-112B. AirTech 70-112B 6 halaman. Land mobile radio (lmr)

Unpacking

Unpack and check that all items have been enclosed.

Packing contents:radioαantennaβbatterypack (1,350mA)

χbelt cilpδhand strapεchargerφuser`s manual



Optional Accessories

1. External earphone & MIC. (APE–10)

2. Additional battery pack (720 mAH, HM–720)



βα

Getting Ready

Installation, Removal Belt Clip

Installation: align the belt clip with the

plastic slots of the battery pack. Slide

the belt clip onto the battery pack,

pushing firmly until a click heard.

Removal: hold up the belt clip release

tab with a fingernail or a coin (or like

instrument). While holding up the

release tab, slide the belt clip out and away from the

battery pack.

Installation, Removal Battery Pack

Installation: turn off the transceiver. Hold the transceiver

with the back of the unit facing up. Place the battery

pack against the back of the transceiver so that the tabs

on the transceiver engage the four openings in the

battery pack. Slide the battery pack toward the top of the

transceiver until a click heard.

Removal: turn off the transceiver. Hold the radio with the

back of the unit facing up. With the thumbnail of your

other hand slide the latch lever down. While holding the

latch lever down, slide the battery pack down toward the

bottom of the transceiver. Separate the battery pack

from the transceiver.

Installation Antenna

Rotate the antenna clockwise until it

is seated firmly.

*. Before your starting operation, make

sure the battery is fully charged.