Atlantic Ultraviolet SANITAIRE RSM2680 Pengoperasian & Pemeliharaan Instalasi - Halaman 9

Jelajahi secara online atau unduh pdf Pengoperasian & Pemeliharaan Instalasi untuk Aksesori Atlantic Ultraviolet SANITAIRE RSM2680. Atlantic Ultraviolet SANITAIRE RSM2680 16 halaman. Germicidal ultraviolet room air sanitizers

Halaman Cetak

Carefully examine the pin configuration on the STER-L-RAY

installed correctly into the lampholder. (See Figure 6 below, which shows the lampholder, and Figure 7 below, which shows

the lamp base.)

Begin installing the STER-L-RAY

STER-L-RAY

lamps have been installed.

Holding the STER-L-RAY

connector (See Figure 8).

6. Once the STER-L-RAY

Figure 8 – Lamp Installation (Bottom)

7. Repeat until all STER-L-RAY

8. Verify unit operation by viewing the Monitoring Panel on the front of the SANITAIRE

If unit is not operating properly, go to "Troubleshooting" section on Page 14.

lamps starting with center row, continue to the next row closest to the door until all

Figure 6

lamp so that its pin configuration matches the lampholder, carefully push the lamp into the

lamp is securely seated into the connector, carefully push it into the end support (See Figure 9).

lamps have been installed into the unit. Close access doors and restore power to the unit.

lamps base to ensure that the STER-L-RAY

Figure 9 – Lamp Installation (Top)

RSM2680 (See Figure 3 on Page 7).

lamp is

Figure 7