Atlas Donaire Petunjuk Manual - Halaman 10

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Kipas angin Atlas Donaire. Atlas Donaire 13 halaman. 52” ceiling fan

Halaman Cetak

1. Operating the Remote Control

9. ATTACHING THE

MOUNTING PLATE

Step 1. Remove the 1 of 3 screws from the

mounting ring and keep it for future use. Loosen

the other 2 screws. (Do not remove)

Step 2. Place the key holes on the mounting plate

over the 2 screws previously loosened from the

mounting ring, turn mounting plate until it locks in

place at the narrow section of the key holes.

Secure by tightening the 2 screws previously

loosened and the one previously removed. (Fig. 14)

10. INSTALLING THE LIGHT

KIT

REMEMBER: To disconnect the power.

If you do not plan to install the light

kit with your fan at this time, skip

step 2 & 4.

1. Remove 1 of 3 screws from the mounting plate

and loosen the other 2 screws. (Do not remove)

2. Raise and hold the LED light kit close to the

mounting plate and proceed to do the wire

connections. Make the 2-pin wire connections:

(Fig. 15)

- Red to white

- Black to black

NOTE: Please DO NOT connecting the light kit

wire if installing the optional metal light cover.

3. Place the key holes from the light kit over the 2

screws previously loosened from the mounting

plate, turn the light kit until it locks in place at the

narrow section of the key holes. Secure by

tightening the 2 screws previously loosened and

the one previously removed. (Fig. 15)

4. Raise glass shade up against bottom of fan

housing and secure it to the fan by turning the

glass shade clockwise until snug. DO NOT

OVERTIGHTEN.

5. If installing the optional metal light cover, make

sure is securely tighten.

NOTE: The metal light cover included with your

fan is an option to replace the glass for the light in

the event that you prefer not to use the light

feature of your fan. The metal light cover is not

necessary for the light operation; it can be saved

for later use if desired.

Mounting

plate

Connectors

Mounting ring

Screws

Figure 14

Mounting plate

LED Light kit

Screws

Glass shade

Figure 15