Alert 750R Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Starter Jarak Jauh Alert 750R. Alert 750R 15 halaman. Remote engine starter with alarm system

Halaman Cetak

STOP THE MELODY SOUND ONLY: While triggering the alarm the LCD screen will alert user through

melody sound and flashing trigger icon, press any button on the LCD remote transceiver to stop melody

sound only

CLEAR THE FLASH ICON AND MELODY SOUND: While triggering the alarm the LCD screen will alert

user through melody sound and flashing trigger icon, press the

the flash icon and stop melody sound on the LCD screen transceiver.

NOISE ABATEMENT CIRCUIT: You system has "Noise Abatement Circuit". It prevents annoying

repetitive trigger sequences due to faulty door pin switches or environmental condition such as thunder,

jackhammers airport noise, etc.

Here's how "Noise Abatement Circuit" works: The alarm triggers five times. Each time, the same sensor or

switch is triggering the alarm. "Noise Abatement Circuit" will interpret this pattern of triggers as false alarm.

After the fifth trigger, "Noise Abatement Circuit" ignores, or bypasses, that sensor or switch until the other

sensor or switch is trigger.

"Noise Abatement Circuit" covers doors (Hood/Trunk) differently: If the alarm is triggered by an open door

for six full cycles, the doors will be bypassed until the trigger ceases.

O. ANTI CAR- JACKING

Warning: If you don't need the car jacking function in this alarm system, be sure to set car jacking feature

"OFF". This system is default setting all car-jacking "OFF".

ACTIVE ANTI CAR JACKING:

1. Press and hold the transmitter

ignition is ON. The parking lights will turns on for 1.5 seconds to indicate the system enters the

car-jacking mode.

2. Once the system in car-jacking mode, If you are forced from the vehicle, the system will be trigger

when the door is opened and closed while the ignition is "ON".

PASSIVE ANTI CAR- JACKING:

1. Turn the ignition switch to "ON" position; the system enters the car-jacking mode.

2. Once the system in car-jacking mode, If you are forced from the vehicle, the system will trigger when

the door is opened and closed while the ignition is "ON".

TRIGGER THE ANTI CAR -JACKING MODE:

a). 50 seconds after the system has beer triggered. The siren will start chirping for 15 seconds.

b). During this 15 seconds period of chirping, you will be alerting to push the valet switch once to turn off

the car-jacking feature. If not, it will enter second timer car jacking.

c). 65 seconds after the system has beer triggered. The siren starts alarming and the parking light starts

flashing.

d). 90 seconds after the system has beer triggered

1. The siren still alarming and the parking light flashing, and

2. The starter disable will activate to prevent the vehicle from starting.

3. It will remain active until the vehicle's battery power exhausted.

OVERRIDE THE SYSTEM TO TURN OFF ANTI CAR- JACKING:

Turn the ignition switch from OFF to ON, and within 10 seconds push valet switch, the siren will stop and

the system disarmed

Note: If you use password pin code to double protect the vehicle security, you will need to use it to

completely disarm the system.

P. SYSTEM'S TRIGGER CHECK

Press the transceiver

with one melody sound and all trigger's records will immediately displayed on the LCD

screen.

Note: If it has no responds then you are out of range.

Q. SYSTEM'S STATUS CHECK

When you want to check the system's present status through the LCD screen, Press the

transceiver

button twice, within 3 seconds press

melody sound, the LCD screen should be illuminated.

Note: If it has no responds then you are out of range.

750R OP

and

buttons at the same time for 2 seconds while the vehicle's

(For two-way transceiver operation only)

button first, within 3 seconds press

(For two-way transceiver operation only)

button 3 times within 3 seconds will clear

(C)

button. It responds

(C)

button. It responds with one

MAY/03/2004