Atlas Copco PHE 6 S Petunjuk Perbaikan - Halaman 11

Jelajahi secara online atau unduh pdf Petunjuk Perbaikan untuk Bor Atlas Copco PHE 6 S. Atlas Copco PHE 6 S 18 halaman.

Assembly

PHE 6 S:

Press the bearing (1) onto the bevel

Mounting the

gear (4). Fit the spring washer (2) and

cylinder

secure it with the spring ring (3).

Insert the bevel gear (4) completely with

the bearing (1) flush into the housing.

Insert the cylinder (5) into the housing as

far as it will go.

PHE 6 H:

Press the bevel gear bearing (2) into the

Mounting the

bevel gear (1).

bevel gear

Press the bevel gear (1) flush with the

bearing (2) into the gear housing (3) using

a suitable mandrel for support.

Mounting the

Press the needle bearing (6) into the con-

piston and the

necting rod (5).

connecting rod

Push the striker (1) with the O-ring (2) into

the piston (3).

Put together the piston (3) and the con-

necting rod (5) and push the cylindric

bolt (4) through both borings.

Insert the piston (3) with the connecting

rod (5) into the gear housing (7).

Repair Instructions No.181.03/98

PHE 6 H / PHE 6 S

PAGE