Bose L1 Model II Panduan Pemilik - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Bose L1 Model II. Bose L1 Model II 32 halaman. Portable line array systems
Juga untuk Bose L1 Model II: Panduan Pemilik (32 halaman), Panduan Pemilik (28 halaman), Lembar Data Teknis (8 halaman), Lembar Data Teknis (8 halaman), Manual Aplikasi (13 halaman), Manual (15 halaman)

Svenska

Nederlands

YSTEM

ETUP

Adding a PackLite

Figure 10

Connecting the A1

amplifier to the power

stand

Italiano

Français

Svenska

Using a PackLite

power amplifier model A1 allows you to add one or two additional B1 mod-

ules to your system. Refer to the A1 owner's guide for detailed operating instructions.

1. Make sure the A1 amplifier power switch is OFF.

2. Plug one end of the supplied ¼" TRS cable into the Bass - Line Out connector on the

power stand. Plug the other end into the INPUT connector on the A1 amplifier.

3. Connect a B1 bass module cable from the OUTPUT connector on the A1 to a B1 bass

module. If desired, connect a second B1 to the first B1.

4. Plug one end of the AC power cord into the A1 amplifier and plug the other end into an

AC (mains) outlet.

5. Switch the A1 power switch to ON (I).

Power stand

Bass - Line Out

CAUTION: DO NOT stack more than four

B1 modules in a column.

Nederlands

Español

Français

Deutsch

Italiano

Deutsch

Español

Dansk

English

Dansk

PackLite

power

amplifier

Additional B1

bass modules