Bose T5 Panduan Servis - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Servis untuk Headset Bose T5. Bose T5 31 halaman. Tactical headset

The T5 headset is capable of working in noise environments with sound pressure levels up to

115dB(C) SPL which means it is most useful in small and large wheeled vehicles as well as

many fixed and rotary wing aircraft.

The T5 headset consists of four main assemblies:

1. An active noise canceling headphone (two ear cups with ear cushions)

2. A suspension system (Napeband with over-the-head Velcro straps to support the weight)

3. A control cable assembly which provides power management, houses the necessary user

interface controls and adapts the headphone to the customer's needs (by changing cables

to be compatible with desired source). The control cable assembly can be removed from the

earcups and replaced in the field.

4. A noise canceling boom microphone enabling communications. The microphone can be

easily replaced in the field.

The earcups each contain external-facing microphones and circuitry to allow Talk-Through, or

the ability to monitor external sounds such as speech without having to lift the earcups off of the

ear. This talk-through (TT) circuit limits external sounds to be no greater than 85dB at the ear.

The T5 headset has a volume control for the talk-through feature with volume settings will be

OFF; unamplified, medium amplification and high amplification. In all settings, the above men-

tioned 85dB limit is enabled.

The ear cushions used on the headset contribute to the performance as well as the overall

comfort of the headset. The ear cushions consist of polyurethane foam inside a polyurethane

film.

The napeband consists of a single, arc shaped spring formed to tuck behind the nape of the

user's neck and head and to provide the desired clamping force. Two yokes connect the spring

to the earcups. The assembly is adjustable to fit most head sizes. The yokes and earcup

interface allow for rotation in 2 axes in order to allow optimum fit for performance as well as for

comfort. Additionally, the assembly includes a soft pad to provide cable routing and a comfort-

able fit behind the head for extended wear periods. The napeband / yoke assembly can be

completely disconnected from the earcups for replacement.

The control cable mates to the bottom of the left ear cup via a connector and housing that is

screwed to the earcup for robustness. This housing also mounts the flexible gooseneck boom

with integral noise canceling boom microphone. The control module contains a smart power

management system which can power the headset off of an external (vehicle) power source or

can use the on-board 2 AA batteries. In either case, the headset is fully functional to provide

active noise reduction (ANR), clear two way communications and talk-through capability. The

headset is also configured to provide passive noise reduction and clear two way communica-

tions when there is no power source (fail safe mode). The control module is configurable via

cable selection to enable connection of up to two input sources at any one time including inter-

coms, portable communication radios or other auxiliary audio or communication devices.

The control module also includes an integrated clothing clip that enables the module to be

securely mounted to a variety of clothing or equipment in a variety of orientations that best suit

the application at hand. The clothing clip can be mounted on both the front and the back face of

the control module in order to facilitate operation with either the left or the right hand or to cater

to different user preferences.

PRODUCT DESCRIPTION