Anova CC251T Petunjuk Manual - Halaman 11

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Mesin Pemotong Rumput Anova CC251T. Anova CC251T 19 halaman.

Start of operation

ONE

: Adaptation for compost cutter

WARNING: only in case of stopped motor or static cut.

1.Raise the rear cover and remove the grass catcher.

two.Push the quilting wedge into the cover. Lock the quilting wedge with the button in the opening of the

cover. (Fig.6A/Fig.6B)

3.Replace the rear cover.

Fig.6A Fig.6B

TWO

: Reprogramming for side discharge mowing

WARNING: only when the motor and the cut are static.

1.Raise the rear cover and remove the grass catcher.

2. Mount the mulching wedge.

3. Raise side flap for side discharge. (Fig.7A)

4. Mount the side discharge discharge guide to the side flap support pin. (Figure7B)

5. Lower side flap, flap rests in discharge chute.(Fig. 7C)

Fig.7A Fig.7B Fig.7C

THREE

: Cut with the grass catcher

To mow with the grass catcher, remove the spreader wedge and side discharge chute and mount the grass

catcher.

1. Extraction of the subscriber wedge:

- Raise the rear cover and remove the spreader wedge.

2. Side Discharge Chute Extraction for Side Discharge:

- Lift the side flap and remove the side discharge chute.

-The side flap automatically closes the discharge opening in the housing by spring force.

-Regularly clean the side flap and the discharge opening forms from the rest of grass and adhering dirt.

3. Assembling the grass catcher:

-To fit: Raise the rear deck and hook the grass catcher onto the rear of the mower.

-To remove: Grasp and lift rear cover, remove grass catcher.