DS Produkte 07657 Panduan Petunjuk Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pembersih Uap DS Produkte 07657. DS Produkte 07657 6 halaman.

Halaman Cetak

Items Supplied

•

Upper shaft (1 x)

•

Lower shaft (1 x)

•

Tank (1 x)

•

Cleaning foot (1 x)

•

Floor cloth (1 x)

•

Dust cloth (10 x)

•

Operating instructions (1 x)

Check the items supplied for completeness and the components

for transport damage. If you ﬁ nd any damage, do not use the prod-

uct but contact our customer service department.

Before Initial Use

Please Note: Water residues in the tank (10) are attributable to

quality checks.

1. Remove any protective ﬁ lms.

2. Plug together the upper shaft (3) and lower shaft (11) as well as

the cleaning foot (7). All parts must engage.

Use

Dusting

1. Place a dust cloth on the ﬂ oor and position the cleaning foot

on the middle of it.

3. Wipe the dust cloth over the dry ﬂ oor.

Mopping / Window Cleaning

PLEASE NOTE!

■

Make sure when cleaning laminate ﬂ oors that not too much

cleaning liquid is sprayed onto the ﬂ oor as otherwise the

laminate could swell!

5. Screw the lid onto the tank and place it with the lid ﬁ rst into the

spray head.

6. Fix the tank in the spray head using the locking catch.

7. Attach the ﬂ oor cloth to the cleaning foot (7) by means of the

hook and loop fastener.

8. Press the spray trigger (2) a few times to wet the ﬂ oor.

9. Wipe the ﬂ oor cloth over the wet ﬂ oor. Respray the ﬂ oor if

necessary. Please Note: If you are cleaning fairly large sur-

faces, the tank may need to be topped up in between times.

Adopt the same approach when cleaning windows and remove the

excess water from the cleaned surface using the scraper lip (6).

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •

07657_DE-EN-FR-NL_A4_V1.indd 3

2. Push the protruding parts of the

dust cloth at the front and rear into

the dust cloth holders.

1. Turn the locking catch (4) to the side

to release the tank.

2. Pull the tank (10) up out of the spray

head (5).

3. Unscrew the lid from the tank.

4. Pour water and / or liquid cleaning

agent into the tank as you require.

Customer Service / Importer:

*) Calls to German landlines are subject to your provider's charges.

After Use

•

If the dust cloth cannot hold any more dust, dispose of it and

replace it with a new dust cloth.

•

Always empty the tank (10) completely after use! Rinse it

out with clear water. Allow the tank to dry before it is closed up

for storage.

•

Clean the ﬂ oor cloth immediately after each use to prevent

germ formation.

•

Take oﬀ the ﬂ oor cloth. Wash it in accordance with the wash-

ing instructions on the label. It can be washed in the washing

machine. Do not use any fabric softener as this can reduce

the absorbency of the ﬂ oor cloth! Then allow the ﬂ oor cloth to

dry in the air.

•

Clean the parts of the mop with a damp cloth and a mild deter-

gent if necessary. Do not use any caustic or abrasive clean-

ing agents or cleaning pads!

•

To take the mop apart, press the locking lugs on the shaft (3,

11) and cleaning foot (7) and pull the parts apart at the same

time.

•

Store the product in a clean, dry, frost-free place that is not

accessible to children and animals.

Product Data

Article number:

Tank capacity:

ID of operating instructions:

Disposal

Dispose of the packaging material in an environmentally

friendly manner so that it can be recycled. If the product is

no longer going to be used, dispose of it in an environmen-

tally friendly manner as well.

✆

Operating instructions

07657

max. 350 ml

Z 07657 M DS V1 0919

+49 38851 314650 *)

13.09.2019 13:50:46