DSC PC51O Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Sistem Keamanan DSC PC51O. DSC PC51O 16 halaman. Pc51o
Juga untuk DSC PC51O: Panduan Instalasi (20 halaman)

Halaman Cetak

SL-40 KEYPAD

Zone Lights 1 to 4 indicate zone activity.
When a zone is secure, its Zone Light will be
OFF; when a zone is open, its Zone Light will be
ON. If a zone goes into alarm when the system
is armed, the alarm will be indicated on the
zone lights until the system is disarmed. If the
"Ready" light is OFF and none of the Zone
Lights are ON, the Tamper Zone has been
activated.
The "Ready" light will come ON when the system
is ready to be armed. When the "Ready" light is
OFF, there is an open zone on the system. The
zone must be closed or bypassed before the
system can be armed.
The "Armed" light will come ON to indicate that
the system is armed.
FLASH to indicate that the system is armed and
that there is no Entry Delay on any of the zones.
The "System" light will come ON to indicate:
• that zones are bypassed
• there is a trouble condition on the system
• there are alarms in memory.
∗
Use the [
][1][Access Code] command to
display the zones that have been bypassed; be
sure that zones are intentionally bypassed
before arming the system.
∗
Use the [
][2] command to display any trouble
conditions; be sure to have trouble conditions
corrected by your installer as soon as possible.
∗
Use the [
][3] command to view the alarms in
memory.
Press [#]:
• when an error is made in entering an Access Code, then enter the code again
• to return to "Ready" after using [
[F] Key: Press and hold this key for 2 seconds to sound an [F] Key alarm
[A] Key: Press and hold this key for 2 seconds to generate an [A] Key alarm
[P] Key: Press and hold this key for 2 seconds to generate a [P] Key alarm.
These keys must be enabled by your Installer before they become functional.
Your Installer will tell you how these keys operate on your system.
Important:
Follow the instructions in the manual to test your system weekly. Follow the
guidelines for correcting system trouble conditions; have any system trouble
conditions you cannot correct yourself attended to by your installer.
The "Armed" light will
∗
1
Ready
] commands
2
3
4
Armed System
7
7