ATS-TN PAVDII Mulai Cepat Manual Dan Manual - Halaman 8

Jelajahi secara online atau unduh pdf Mulai Cepat Manual Dan Manual untuk Aksesori Telepon ATS-TN PAVDII. ATS-TN PAVDII 13 halaman. Ats-tn pavdii personal assistance voice dialer ii

Halaman Cetak
3 INSTALLATION
Telephone line needs to be disconnected
prior to opening the battery compartment!
Put batteries in battery compartment to activate display
 Unscrew battery compartment on bottom of telephone
 Insert 4 Alkaline AA (LR06, 1.5V) batteries (not included)
 Close battery compartment
 Connect one end of telephone line cord to telephone wall
jack and other end to back of telephone
 Connect power adapter to connection on back of
telephone and to available power outlet
 If you do not install batteries, the "Low Battery / No
Battery" LED will continue to flash
 When replacing batteries, pick up handset first, then
replace batteries – otherwise time clock setting will be lost
 System will run on battery power for emergencies

4 DESCRIPTION OF DISPLAY

Upper line displays basic information, middle line displays
telephone number and bottom line displays name of caller
is Low or No battery indicator
 "REPEAT" means the repeat of an incoming call
 "VOICE" means voice reporting indicator
 "NEW" means there are new incoming calls
 "SOS" means emergency calls
 "XX:XX XX/XX" means Hour / Minute - Month / Date
Page 8
5 USING TELEPHONE
6.1 MAKING CALLS
 Enter telephone number
 Press DEL to delete wrong entered number
 Press
or
to make hands-free call or,
 Pick up handset to off-hook and enter telephone number
Volume of handset can be set HI or LOW (27)
During call made with handset, you can switch to hands-
free by pressing
Hands-free volume is adjusted using button (10)
In case telephone is connected to PBX system it may be
necessary to add a Pause after PBX access code.
Telephone can generate a '4' second Pause time.
EX: 0 P 012345678
Press RD/P to enter a Pause
Call duration timer will start in display 4 seconds after number
is dialed.

6.2 RECEIVING CALLS

When a call comes in, phone will ring and ringer LED will
blink
Pick up handset or press
hands- free
Use switch (23) to set ringer volume
A call that has been accepted by use of the pendant
can also be terminated by pressing the pendant again
and hanging up handset.
or Pendant to answer
Page 17