aTTo Digital PoweREC Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perekam Suara aTTo Digital PoweREC. aTTo Digital PoweREC 10 halaman.
Juga untuk aTTo Digital PoweREC: Panduan Pengguna (5 halaman)
Halaman Cetak
and date set up.
Open time.txt file with any text editor installed in your system and put the
current time and date with the format: yyyymmddhhmmss, as follows:
yyyy – four digits format for year (ex. 2018), mm - is 2 digits month (ex. for
May is 05), dd - 2 digits day (ex. if today is in 3rd - you must put 03). hh - means
2 digit hour format (24 hours format, not AM or PM)- ex. for 5 PM you must
use the digits 17, for 6 AM is 06, etc. ; mm - is 2 digit format for minutes and
ss - is 2 digit format for seconds.
Please refer to the below example to better understand the required format:
nd
If today would be the 22
of May 2018, at 05:24 PM, here is what you should
input in the time.txt file: 20180522172400 (no spaces in front or after these
digits).
After filling in the proper digits, save the time.txt file and disconnect the recorder
from the computer.
When you initialize the recorder, it will automatically create audio files named
with the correct date and time stamp.
If by any reason you will not find the file "time.txt" in the RECORD folder,
please follow these steps to create a new "time.txt" file:
Connect the recorder to your computer and access the folder RECORD. Create
a text file with the name time in the folder. Please make sure that the file is
properly created in the folder RECORD, , otherwise the device will not set the
time and it will use the original date and time of the manufacture date.
To summarize, in the folder RECORD, you will have a sub-folder named
VOICE, where all the audio files will be saved, and the time.txt file where you
can input the proper date and time according to the above instructions.