Aucma AUS-S2 Panduan Instruksi Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Instruksi Pengoperasian untuk Sistem Penyaringan Air Aucma AUS-S2. Aucma AUS-S2 7 halaman. Ultrafiltration under sink water filter system

Halaman Cetak

Maintenance

Fault Diagnosis and Troubleshooting

Troubles

Possible Cause

The filter is blocked

Decreased

The water pressure is low

Outflow

The ball valve is not fully opened

Check if the ball valve on the water inlet end is fully opened

Failed filter

Bad Water

Long-term

Quality

suspend(＞3 days)

Poor inlet water

Wrong installation of PE Pipe

Connector is broken

Leakage

The pipe is leaked,

the inlet 3-way valve

or the ball valve is broken

Note:

The filter needs to be replaced in time to ensure the safety

of the filtered water; If not replace filter in time, it'll weaken

filtration efficiency, increase maintenance cost, shorten

service life of water filter and cause other adverse effects.

Solutions

Change filter

Take supercharge Measures

Change filter

Turn on the tap and let the

water run for 30 minutes

To ensure that the water source is municipal tap water

Please cut off the water supply and

contact our after-sales service employee

Warranty Statement

Dear Users:

Thank you for choosing Aucma products, we will provide you with quality services.

You can enjoy the following services provided by our company :

(1)Free repairing is available for the water purification machine (except the filter) for

their functional defects within one year.

(2)The water filter can not be used for commercial purposes, otherwise the warranty

period for whole machine (except the filter) and the main accessories will be shorten

to 3 months, unless otherwise stipulated in the purchase and sales contract.

(3) The warranty period shall be calculated from the original date of purchase.

2.We do not provide free repair services to the following situations but we can provide

you with paid service.

(1)Exceeded the warranty period, but can be used after repair;

(2)Damages caused by transportation, improper storage, misuse or other users' own

reasons.

(3)Products that are removed or repaired without our company's permission or in

maintenance shop without our authorization;