Aopos Anypos200 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Terminal sentuh Aopos Anypos200. Aopos Anypos200 11 halaman.
Juga untuk Aopos Anypos200: Panduan Pengguna (13 halaman)

Halaman Cetak

Anypos

Draw Test

This function is used for accuracy and performance check. Press this bu

and a new pop up window will be popped up in

touc

hscreen was mapped to the touch system.

COM1~COM4 Ring function select

JP1 ：COM1/COM2 Ring function selector

JP2 ：COM3/COM4 Ring function selector

JP1and JP2 enable you to choose between 5V and 12V on COM1～CO

respectively. Since pin

between 5V and 1

Troubleshotting

Often after time spent troubleshooting, the problem is traced to something

as simple as a loose connection.

e problem-specific solutions.

PROBLEM

The display screen is

ark.

The following mes

appears at boot up:

"Invalid system disk,

Replace the disk, and

then press any key"

An unidentified

message is displayed.

You cannot turn on the

9 on COM1～COM4 is reserved for switching

Check the following before proceeding to

Make sure that the Power LED is on and

Anypos is not in suspen

the display brightness.

sage

Ensure that an operating system is installed.

Check the boot seq

utility.

Reboot the terminal and run the BIOS Setup

Utility. Confirm the Setup Utility parameters.

If the same message is displayed after booting

up again,

Check the AC adapter connection. Make sure

the location where the

SOLUTION

d mode, and adjust

uence in the BIOS setup

Point of Service

tton