Abus PLSG10000 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Keamanan Abus PLSG10000. Abus PLSG10000 16 halaman. Z-wave indoor siren
Juga untuk Abus PLSG10000: Panduan Cepat (4 halaman)

Halaman Cetak

2.5. Wake up device / Wake-up

2.6. Audio files

General Information



The siren is used to play audio files from the built-in speaker.



You can download audio files from the Windows PC to the device's memory and play them back

using commands from the Z-Wave controller.



In addition, the device memory already contains 14 useful files:



Further language files in German and English are available for download:

www.abus.com/product/PLSG10000



For example, you can be informed about fault messages, such as low battery status of a

component, or status changes of the system, e.g. activation or output delay.



Use sound editor software on a PC to change the audio files to match the following formatting:

Format: WAVE format (file extension '. wav')

 Other formats, like MP3 files, have to be converted to . wav

Sampling rate: 8KHz~32KHz.

Mono only

Maximum length: 30 seconds for each file



Save the files in a folder. Make sure that the total size of all files does not exceed approx. 5

MByte, which corresponds to about 85 seconds playback time.

Note the Capacity display:

Press the Link button once to wake up the

device. It then establishes a connection to the

Z-Wave gateway and transmits the current

status.

English