audiophony SX15A Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Pembicara audiophony SX15A. audiophony SX15A 8 halaman. 12/15 inches 2-way amplified speakers with bass reflex
Halaman CetakSX12A / SX15A - 2 way bass reflex 12/15" powered speakers
11
Indicator LEDs
-POWER : Indicates the amplification module is ON.
-SIGNAL / LIMIT : Indicates an incoming signal
has been detected. It also Indicates the
incoming signal exceeds 0 dB. In this case,
please use the volume control faders to
make sure this LED only lits occasionaly to
prevent any damage to the speaker and an
optimal sound quality.
5 - Optional Bluetooth module
1
Button
This button allows:
- Powering up the module.
- Bluetooth pairing.
To do so, press and hold this button for more than 3
seconds until the displays
Access your device's Bluetooth settings and accept the
connection
The password is 1234.
2
VOL- et VOL+ buttons
Adjust the output level of the module.
3
Display
Displays power-up, Bluetooth pairing and connection
status.
3
and
flashes alternately.
12
Earthing system button
Allows you to connect/disconnect the ground to the
earth.
If buzzing or humming noises occur, they might be
caused by spurious signals transmitted by the earthing
system.
In this case, please disconnect it (button released).
4
5
2
1
4
and
buttons
Allows you to move through the file tree of your
Bluetooth device.
5
button
Playback can be started or paused.
ENGLISH
Page 5