Audiosmile Kensai MKII Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembicara Audiosmile Kensai MKII. Audiosmile Kensai MKII 3 halaman.

Specifications:

Size:

Weight, Each / Pair In Case:

Frequency Range:

Recommended Amplifier Power: >40watts

Sensitivity:

Impedance:

Crossover:

Bass Alignment:

Connection:

Care:

Do not over-tighten the binding posts.

Do not place the Kensai on stands with spiked top-plates. The bottom of the

Kensai will be marked.

The Kensai can play loud for a speaker of their size, but if they begin to

distort, or 'chuffing' sounds are heard from the port, then reduce the volume

immediately. As a guide, if they sound good, they are probably okay.

To clean the Kensai leatherette, use a slightly damp microfiber cloth. To

restore shine of the side panels, buff with a dry microfiber cloth. To remove

dirt from the side panels a damp cloth can be used but the sides should be

dried and buffed directly afterwards to avoid moisture ingress.

Natural wood can change colour when exposed to sunlight for an extended

time.

Avoid placement next to a direct heat source such as active radiator.

Handle the Kensai with care at all times.

16cm x 29cm x 20cm WHD

4Kg / 10Kg

48Hz-26KHz -6dB

86dB

6 Ohm Minimum

1.9KHz, Phase Aligned 4th order

Extended Bass Shelf

2x Binding Posts. Accept bare wire, 4mm

banana, 8mm spade