ADE M25611 Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Timbangan ADE M25611. ADE M25611 8 halaman. Electronic handrail scale

Caution:

Please operate the scale only with the original ADE mains adapter that has been delivered.

Always fit the adapter to the scale BEFORE connecting to an electrical outlet.

Disconnect from the electrical outlet BEFORE disconnecting the adapter from the scale.

The mains adapter is not waterproof. Therefore make sure NOT to use the scale where water

can penetrate.

In case the mains adapter became wet or show visible damages the scale can no longer be

operated by using this mains adapter. In this case please contact your local dealer or service

partner.

Press key ON to start the scale. `8888´will appear on the display which is an automatic

function test and zero setting. When `0.0´appears you are in the kg weighing mode. In addition

display will show the symbol `o´ to confirm stability of the zero setting.

The scale may now be used.

Step on the platform and stand still.

After display is showing your weight and symbol `o´ appeared the most accurate result has

been reached.

To turn off the scale press key OFF for minimum 3 seconds. This is essential if scale is used

on batteries. Using the scale on mains it may remain permanently switched on or can be shut

off manually by pressing key.

You may select the weight unit between kg and lb. Coming from the factory the scale is switched to kg

mode. To change into lb mode press UNIT/HEIGHT key.

Caution

Please check weighing mode after switching to get proper result.

You may set any displayed weighing result back to zero `0.0´by pressing the ZERO key. The

advantage is to weigh shoes or dress separately.

Place objects on the scale.

Press ZERO key.

Unload the scale.

The weight displayed before is showing a negative value and will be deducted automatically

during the next weighing procedure.

The negative value will not be stored.

050100-Rev000-M25611

Weighing