ADE M501660 Panduan Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Timbangan ADE M501660. ADE M501660 12 halaman. Hanseat

The ADE wheelchair-scale is already been delivered in a fully assembled condition. Remove the

packaging and place the scale on a firm and plane surface. Please place your scale free of any

vibration and at a dry place.

1) Place the wheelchair on a plain, dry and level surface before weighing.

3) The air bubble in the spirit level should be right in the centre of the circle.

4) Please ensure that the scale has no other contact to the floor than by the four feet underneath the

platform.

Power is supplied either by the rechargeable battery in the display unit or by the mains power via the

supplied power unit. The rechargeable battery pack is consisting of 4xAA NIMH rechargeable

batteries.

Use the AC adapter to load the rechargeable batteries. The imprinted voltage value at the mains

adapter must match the local mains voltage. When the battery is being charged for the first time a

sufficient charging period of approx. 24 hours is necessary to achieve a full battery load. The wall

socket must be located near to the unit and be easily accessible. Please use only the mains adapter

supplied by ADE. The mains adapter is charging the battery pack at the same time.

The battery compartment is located at the back of the display

1) Open the battery compartment.

2) Remove the battery cables carefully from the housing, connect the wires and insert the battery into

the housing.

3) Close the battery compartment again.

Only use original rechargeable batteries and charger units from ADE. The warranty does not cover

any damage caused by using other types of batteries or charger units.

Assembly and set up

M501660-210512-Rev003-UM-e