BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual - Halaman 4
Jelajahi secara online atau unduh pdf Manual untuk Unit Kontrol BENDIX ATR-1 ANTILOCK TRACTION RELAY. BENDIX ATR-1 ANTILOCK TRACTION RELAY 12 halaman. Relay valves from de-icing chemicals
Juga untuk BENDIX ATR-1 ANTILOCK TRACTION RELAY: Buletin Teknis (2 halaman)
Halaman Cetak
TRACTION
SOLENOID
RELAY PISTON
REAR AXLE
RESERVOIR
FIGURE 6 - SERVICE BRAKES RELEASING
SERVICE BRAKES RELEASING (FIGURE 6)
When the brake application is released, air from above the
relay piston flows back through the blend back and service
pistons to the foot brake valve and is exhausted. As air
pressure is reduced above the relay piston, pressure beneath
it lifts the piston away from the exhaust valve and opens the
exhaust passage. Air from the service brake chambers
returns to the ATR-1
™
valve and flows out the open exhaust.
CONTROLLER
TRACTION
SOLENOID
RELAY PISTON
REAR AXLE
RESERVOIR
FIGURE 7 - TRACTION CONTROL BRAKE APPLICATION
4
CONTROLLER
CHECK VALVE
INLET EXHAUST
EXHAUST
TRACTION CONTROL SERVICE APPLICATION
(FIGURE 7)
GENERAL
While under the control of an antilock traction controller, the
ATR-1
valve's solenoid is able to initiate a brake application
™
that allows the traction system to control wheel spin upon
acceleration under 25 mph. When wheel spin is detected
CHECK VALVE
INLET EXHAUST
BRAKE
VALVE
MODULATOR
SPRING BRAKE
BRAKE
VALVE
MODULATOR
SPRING BRAKE