Airwell RCV03 Panduan Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Kontrol Jarak Jauh Airwell RCV03. Airwell RCV03 8 halaman.

Functional description

1. ON/OFF Button:

Turning on the units:Press the

button to turning on the units

Note: The initial default operation mode is AUTO and then will display the mode before turning off

Press

button again to turn off the unit.

2. MODE

Press the

button every time, Function loop will be:

→

3. TURBO/QUIET

This function is valid under the mode of COOL and HEAT

Along with pressing the

button each time, it will display according to the loop of TURBO→QUIET

→ Cancel →TURBO. Under the function of TURBO / QUIET.

When "SLEEP" is set, the " TURBO " function is disabled and the " QUIET " function is effective.

4. HEALTH

(1) When turning on the units, press

button, the remote controller will display " HEALTH ", and

then press

button to cancel

(2) When turning off the units, press the

button to enter FAN mode and display " HEALTH "

5. TIMER

When the unit is in turning on status, users can only set the TIMER OFF, while in off status, users can

only set the TIMER ON

In Off status, press the

button to enter the TIMER ON adjustment process

In On status, Press the

button to enter the TIMER OFF adjustment process

When entering the timing adjustment process, timer ON/OFF icon and clock flash at the same time,

the initial default value is: 0:30 Press the

button once to increase or decrease the time for 30

minutes, and pressing and holding the button will speed up the adjustment

After the time adjustment is completed, press the

button again to confirm, the time static display,

and start the countdown