GAF TALKING VIEW-MASTER Manual Suku Cadang dan Servis

Jelajahi secara online atau unduh pdf Manual Suku Cadang dan Servis untuk Pemutar Media GAF TALKING VIEW-MASTER. GAF TALKING VIEW-MASTER 2 halaman.

GAF TALKING VIEW-MASTER Manual Suku Cadang dan Servis
PARTS AND SERVICE MANUAL for

ORDERING PARTS

Order parts by part number from GAG Corporation, Consumer
Photo Division, P.O. Box 490 Portland, Oregon 97207. All
parts shipped F.O.B. Portland, Oregon.

SERVICE

When replacing parts note the following: Spring (12) under
tone arm (17) must be firmly seated and touching metal
washer on tone arm. The other end of spring must be over
boss on front assembly (13) and touching flat surface. Install
(early models) grip ring (late models) E-ring (11) 1/16 inch
from end of shaft. NOTE: Motor assembly can be removed
without removing tone arm.
Remove motor assembly (5) by loosening screw (10) and
swinging stop (9) away from right hand motor prong. Squeeze
prong and swing motor assembly out from intermediate plate.
Item
1 2 3 4
1
Sound Bar
2
Mounting Screws—6-20x1
3
Lanyard
4
Speaker Housing Assy.
5
Motor & Trans
6
Spring-Motor
7
Spring-Motor (Red)
Spring-Motor (Green)
Spring-Motor Shaft
8
Belt
GAF CORPORATION NEW YOUR N.Y. T.M. REG US PAT.
OFF. MARCA REGISTRADO. MARQUE DEPOSEE
GAF TALKING VIEW-MASTER
Part Name
Part No.
445-531
501-250
445-805
445-512
445-519
445-609
445-607
445-608
445-606
445-808
CONSUMER PHOTO DIVISION
Note: Some early viewers have a plastic lock which must be
replaced with stop (9).
Unsolder motor lead wires. Before removing motor assembly,
note the way parts are assembled under it and tone arm.
When replacing wires, solder red wire lead to battery contact
(negative on motor to negative on battery).

LUBRICATION

Apply light coating of Dow Corning No. 33 Grease (light-
silicone) to high ridge of speaker cone.
CAUTION: Keep grease off belt and motor shaft.

SPECIFICATIONS

Use new batteries and special strobe record, Part No. 445-
004. Minimum record speed 84 rpm.
Item
1 2 3 4
9
Stop (Late Models)
Lock (Early Models)
10
Screw—2x32x1/4
11
Grip Ring (Early Models)
E-Ring (Late Models)
12
Spring-Tone Arm
13
Front Assy (all other parts)
14
Battery Hatch Cover
15
Spring-Tone Arm Return
16
Spring-Advance Lever
17
Tone Arm Assy.
Part Name
Part No.
445-124
445-444
501-207
590-053
590-001
445-601
445-511
445-516
445-603
445-617
445-510
PART NO. 445-950-02
PRINTED IN U.S.A.
JUNE 1970