Gage Bilt GB704 Manual - Halaman 10

Jelajahi secara online atau unduh pdf Manual untuk Alat Listrik Gage Bilt GB704. Gage Bilt GB704 14 halaman. Installation tool
Juga untuk Gage Bilt GB704: Panduan Instalasi (13 halaman), Manual Petunjuk Asli (20 halaman)

Halaman Cetak

HEAD

WARNING:

Dispose of hydraulic oil in accordance with applicable regulations.

Remove nose assembly from tool before attempting disassembly of head assy.

Remove end cap (704112). Push against threaded end of piston (704507) to slide it out of head cylinder assy (704183). Be careful not

to damage threads or cause burrs on polished piston (704507) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the

socket head cap screws (400061 and 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

S/N: 1090 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

401080 - BACK-UP RING

204304 - SWIVEL ASSEMBLY

403764 - O'RING

Rev. 11/14