Gage Bilt GB715 Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Alat Keling Gage Bilt GB715. Gage Bilt GB715 17 halaman.
Juga untuk Gage Bilt GB715: Manual Petunjuk Asli (20 halaman)

Halaman Cetak

WARNING:

Any other use is forbidden.

The GB715 is a pneumatic-hydraulic tool designed specifically for the efficient installation of a wide range of blind rivets. It weighs

3.80 lbs. (1.7 kg) and can be operated in any position with one hand. It has a 1.200" (30.5 mm) rivet setting stroke and a rated pull

load of 1400 lbs. (6.2 kN) with 90 psi (6.2 bar) air pressure at the air inlet.

The GB715 riveter operates on 90 to 100 psi (6.2-6.9 bar) Max. providing the maximum efficiency. At 90 psi (6.2 bar) air pressure, the

GB715 does not exceed 81.5 dB (A) and consumes 3 cfm at 20 cycles a minute.

The air inlet is provided with 1/4-18 female pipe threads to accept the users air hose fitting.

NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (SEE PAGE 16).

WARNING:

Do not operate in an explosive atmosphere.

The GB715 can be operated between 0ºF — 118ºF

GB715 S/N: 1242 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Weight

- 3.80 lbs. (1.7 kg)

Air pressure req'd

- 90-100 p.s.i. (6.2-6.9 bar) Max.

Air consumption

- .16 SCF/cycle (4.53 L/cycle)

Hydraulic oil

- Automatic Transmission Oil,

Setting stroke

- 1.200" (30.5 mm)

Rated pull load

- 1,400 lbs. (6.2 kN)

Noise level

- 81.5 dB (A)

Vibration

- Tested– No Hazards Found

Dexron III®, or equivalent.

REV. 2/16