Airwheel R6 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Skuter Airwheel R6. Airwheel R6 12 halaman.

Get Started

R6 provides riders with three different riding modes.

1.Electricity-assisted mode

Set right the head, fold kickstand and fasten frame. Adjust bike head and saddle position to ensure a

comfortable riding experience. Find the power switch in the one side of the batter, start it and hold the handle.

First sit on the saddle and step on the pedals one foot by one foot. When riders are ready to ride it, they can

push the accelerator in the right handle to accelerate.

Power switch

Open the power switch

Starting is completed.

2. Man-powered mode

Set right the head, fold kickstand and fasten frame. Adjust bike head and saddle position to ensure a comfortable

riding experience. Find the power switch in the one side of the battery, start it and hold the handle. First sit on the

saddle and step on the pedals one foot by one foot. Rides can pedal it to go forward.

3. Power-assisted mode

Turn on the power switch. Power sensor can sense the rotation, and then give signal to the controller when the

riding ring exceeds three rings, so that power-assisted mode is activated. According to different riders' force,

the level of power assistance changes. When braking, it is out of power-assisted mode. If pedals reverse, it will

realize a faster exit of power-assisted mode. The power-assisted mode is to make riding easier.

R6S does not support pure electric mode.

Learning Skill

Get on

Fold the kickstand, open the power switch

and step on the pedal one foot by one foot.

Handle to

accelerate

Turn the accelerator handle down with

right hand, and the motor speed increases.

Release and go back to zero gear.

Go forward

Turn the accelerator handle down with

right hand to accelerate

- 06 -

Rear

brake

Long press the brake button,

release it when slow down

or stop.

Brake

Hold the brake.

Front

brake