Gaggenau CE261114 Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor Gaggenau CE261114. Gaggenau CE261114 16 halaman.
Halaman Cetak
Touch
.
1.
a The
indicator for the hotplate lights up.
up on the timer display.
Within the next 10 seconds set the required cooking
2.
time on the control panel.
a The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cook-
ing time of the hotplate selected is displayed.
a When the cooking time has elapsed, the hotplate
switches off. A signal sounds and
display for 10 seconds. The
brightly.
Changing or cancelling the cooking time
1.
Select the hotplate.
Touch
.
2.
a The
display lights up brightly.
On the control panel change the cooking time or set
3.
it to .
Switching off the continuous signal
You can switch the signal off manually.
9 Safety switch-off
If you do not change the settings of a hotplate for a
long time, safety switch-off will be activated.
When the hotplate switches off depends on the heat
setting selected (1 to 10 hours).
The hotplate stops heating.
dicator / flash alternately on the hotplate display.
lights
flashes on the
display lights up
and the residual heat in-
Touch any symbol.
▶
a The displays will go out and the audible signal will
stop.
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the preselected cooking time counts down. When the
cooking time has elapsed, the hotplate switches off
automatically.
Switch on the automatic timer in the basic settings.
→ Page 10
Tip: The automatic timer is valid for all hotplates. You
can reduce or delete the cooking time for individual
hotplates. → Page 8
8.2 Kitchen timer
You can set a time of up to 99 minutes after which a
signal will then sound. The kitchen timer runs inde-
pendently of all other settings.
Setting the kitchen timer
Switch on the kitchen timer.
1.
There are 2 different ways of switching the kitchen
timer on.
If a hotplate has been
selected.
If a hotplate has not
been selected.
a The
indicator lights up.
2.
Within the next 10 seconds set the required time on
the control panel.
a The time counts down.
a When the time has elapsed, a signal sounds.
lights up on the timer display. The
the kitchen timer lights up brightly. It switches off
after 10 seconds.
Displaying the time
Select the kitchen timer with
▶
a The time is displayed for 10 seconds.
Setting the correct time
Select the kitchen timer with
1.
Set the required time on the control panel.
2.
9.1 Overriding safety switch-off
Touch any control.
1.
a The display goes out.
2.
Reset.
Safety switch-off en
Touch
twice within
10 seconds.
Touch
.
indicator for
.
.
9