Gaggenau CK 270-604 Manual Petunjuk Pengoperasian dan Perakitan - Halaman 14

Jelajahi secara online atau unduh pdf Manual Petunjuk Pengoperasian dan Perakitan untuk Kompor Gaggenau CK 270-604. Gaggenau CK 270-604 15 halaman. Glass-ceramic hob with superquick cooking zones

Halaman Cetak

Gaggenau CK 270-604 Manual Petunjuk Pengoperasian dan Perakitan

6.3 Installation

Fig. 8

Fig. 9

Fig. 10

When an intermediate shelf is installed, the

distance from the bottom edge of the housing

trough and the shelf or the next combustible

item of furnishing must be at least 50 mm (2").

5080003901

05.02 EB

– Produce the recess for one or several Vario

appliance(s) in your worktop. Proceed as

indicated on the installation sketch and the

dimension table. The dimension table contains

details of the space requirement for the trim

between the appliances.

Important: the angle between the cut surface

and the worktop must amount to 90° (Fig. 8).

– Mark the centre of the recess exactly. Secure

the longer securing rail on the rear edge of the

recess. Make sure that the lugs of the securing

rail lie on the worktop and that the centre

marking of the securing rail is precisely flush

with the centre marking on the recess. (Fig. 9)

– Secure the two shorter securing rails on the

front edge of the recess. Make sure that the

lugs of the securing rails lie on the worktop and

that the inner sides of the securing rails are

precisely flush with the centre marking on the

recess (Fig. 9).

– Lower the appliance into the worktop. Make

sure that the engaging lugs on the appliance

lie exactly on the clamping springs. Press the

appliance firmly into the worktop. The engaging

lugs on the appliance "snap" into the clamping

springs (Fig. 10).

Note: When installing the appliance in granite

or marble worktops, have the holes produced by

a specialist or stick on the securing rails with a

temperature-resistant 2-component adhesive (metal

on stone).

Several appliances can also be installed in indi-

vidual recesses, as long as a minimum clearance of

40 mm (1

") is kept to between the appliances.

Note:

Please note that a distance of 10 mm (

the base cabinet must be observed for safety

reasons.

") from