ADEMCO TI110B1 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Keamanan ADEMCO TI110B1. ADEMCO TI110B1 18 halaman. Gsm/pstn dual network burglar alarm system

Halaman Cetak

program cell phone will get such a message "FFFF", which means that the remote

arming/disarming password has been deleted.

8. Check arm/disarming status by SMS

If you are not sure what current status of alarm panel, you are allowed to use the

following way to check the current status of alarm panel:

(1) Method 1:

Use the program cell phone to edit "

send it to GSM SIM card

to program cell phone

: Use the program cell phone to edit "

(2) Method 2

X" and send it to GSM SIM card. And the GSM SIM card will send the current status of alarm

panel to the number (XXXX...X) (Note: the remote operation password is 4-digits; 0 is

function code ; XXXX...X is alarm receiving number)

you use program cell phone to edit "34560*13912345678" to GSM SIM card.

For example:

And the telephone number "13912345678" will receive the following SMS content. (Note:

3456---remote operation password; 0---function code; 13912345678----alarm receiving

number)

SMS Format:

Protected Business Center (Alarm Location)-------Disarm

Protected Business Center (Alarm Location)-------Arm

9. Arm/Disarm by Cell Phone

You are allowed to use cell phone or fixed telephone to dial the GSM SIM card. And when you

hear "di" indicator voice, please input "XXXX" password. And on hearing indicator, please input

22 or 88, and then the GSM SIM card will hang off automatically. It means that this operation has

been made successfully. (22----Arm Code; 88---Disarm Code)

10. Check the Latest 2 Pieces of Alarm Information

You can use the program cell phone to edit "888888*31*", and send it to the GSM SIM card. And

the alarm panel will send the latest 2 pieces of alarm information to you in the form of SMS. And

the SMS format is as following

No.: 002

Type: THIEF

Note: the "002" "007" stands for the zone number and "Steal" and "Emergency" is its relative

alarm type

Arm/Disarm by SMS

10.

⑴Arm by SMS: You can use cell phone to edit "34562*XXXXX...X" and send it to the GSM

SIM card. The telephone number "XXXXX...X" will receive such a message: "Techwell

Electronic Technology Co., LTD (Alarm location) -------Arm (Status)", which means that the

alarm panel has been armed successfully. (Note: 3456---remote operation password; 2----function

code; XXXXX...X----cell phone number)

(2) Disarm by SMS: You can use cell phone to edit "34568*XXXXX...X" and send it to the GSM

And the GSM SIM card will send the current status of alarm panel

Remote operation password0

No.: 007

Type: Emergency

Remote operation password0

*" and

*XXXX...