ADEMCO TI110B1 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Keamanan ADEMCO TI110B1. ADEMCO TI110B1 18 halaman. Gsm/pstn dual network burglar alarm system

Halaman Cetak
Aid". Press the key "
all the zones will be default to be alarm type "Steal" if you don't do this program)
(2) Set the "Steal" alarm type
Demonstration: set the zones from 1
Operation steps: press the key "
PROG.
Steal
Zone
4
5
0
1
0
inform that you have set the alarm type successfully. When alarming, the screen will
display the alarming zone and their alarm types
(3) Set other alarm type
Similarly, you can press the key "
alarm types, and you input the zones and press the key "
alarm type successfully. (Note: the zone number should be 2-digit; if not, please add "0"
ahead)
(4) Cancel the alarm type: press the key "
which you want to cancel, please input
inform that you have cancelled it.
7. Prerecord the alarm language segment
(1) Turn on the "program" switch and press the "
seeing that the recording indicator shining, you can aim at the microphone to prerecord
20-second alarm language segment. On prerecording the language, please turn off the
"Program" switch.
(2) Replay recorded segments: press the "
prerecorded. If the segment is not clear, you can record once again and the new one will
automatically cover the former one.
(3) Delete the recorded segment: press the "
deleted.
8. Match code between the detector and the host
add-on detectors, and there is no need for the original detectors to rematch code with host )
", and the screen display these seven alarm types in order. (Note:
st
th
th
to 5
, 10
and 12
" continuously, and the screen displays
and then input
0
1
. and the alarm panel sounds a long indicator to
1
2
Enter
" continuously and when the screen displays the
", and when the screen display the alarm type
.The host sounds a indicator voice to
8
" key and you hear the segment that you
Play
" keys and the recorded segment will be
L
H
Zone code
jumper
Indicator
Address code
jum per
Infrared tube
The structure of Circuit Board of Detector
9
th
zones into "Steal"
0
2
0
0
3
.
". And then you can set the
Enter
" key without releasing. When
(Note: this way is suitable for the
L
H
Code-matching
Work ing mode
On
H
M
Off
L
Sensitivity
Power
.