AFG 1.0AT Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Treadmill AFG 1.0AT. AFG 1.0AT 17 halaman. Afg series

Halaman Cetak

AS S E M B LY

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

WARNING

During the assembly process of the treadmill there are several areas that special attention must be paid.

It is very important to follow the assembly instructions correctly and to make sure all parts are firmly

tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that

are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play

in the console masts or any forward and back play in the console assembly or handlebars. If there is any

play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the

assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on

your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side.

Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled

and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The

enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab

hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE

INSTRUCTIONS COULD RESULT IN INJURY!

Before proceeding, find your treadmill's serial number

and model name located to the left of the on/off

power switch and power cord and enter it in the space

provided below.

ENTER YOUR SERIAL NUMBER AND

MODEL NAME IN THE BOxES BELOW:

SERIAL NUMBER :

MODEL NAME:

* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.

* Also enter this serial number on your Warranty Card.

1.0AT_Rev.1.2.indd 6-7

1.0AT ASSEMBLY

CONSOLE

CONSOLE MAST

CIRCUIT BREAKER

ON/OFF SWITCH

POWER CORD

MOTOR COVER

TRANSPORT WHEEL

RUNNING BELT / RUNNING DECK

PARTS INCLUDED

1 Power Cord

1 Safety Key

1 Support Bar

1 Console Assembly (Located Under Treadmill Deck)

1 Bottle of Silicone Lubricant

2 Console Masts

4 Hardware Bags

If you have questions or if there are any missing parts, contact Customer Tech Support.

Contact information is located on the back panel of this manual.

For a complete exploded diagram, visit us at www.advancedﬁtnessgroup.com

WATERBOTTLE HOLDER

READING RACK

OVERLAY

GRIP PULSE HAND RAILS

SAFETY KEY PLACEMENT

SUPPORT BAR

FOOT LOCK LATCH

SIDE RAIL

ROLLER END CAP

REAR ROLLER ADJUSTMENT BOLTS

TOOLS INCLUDED

5mm T-Wrench

6mm T-Wrench

10mm L-Wrench

17mm Flat Wrench

7/23/07 10:47:09 AM