ADEMCO QUEST 2160 Panduan Memulai Cepat - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sensor Keamanan ADEMCO QUEST 2160. ADEMCO QUEST 2160 4 halaman. Microwave/pir intrusion detector
Halaman CetakRegular maintenance and inspection (at least annually) by the installer and frequent testing by the user are vital to the continuous satisfactory operation of any
alarm system.
The installer should assume the responsibility of developing and offering a repair maintenance program to the user, as well as acquainting the user with the proper
operation and limitations of the alarm system and its component parts. Recommendations must be included for a specific program of frequent testing (at least
weekly) to ensure the systems operation at all times.
While this Intrusion Detector is a highly reliable intrusion device, it does not offer guaranteed protection against
burglary. Any Intrusion Detection device is subject to compromise or failure to warn for a variety of reasons. For
example:
•
These Motion Detectors can only detect intrusion within the designated ranges as diagrammed in this installation
manual.
•
The passive infrared sensor in this Motion Detector does not provide volumetric area protection. It does create
multiple beams of protection, and intrusion can only be detected in unobstructed areas covered by those beams.
•
Passive Infrared Detectors cannot detect motion or intrusion that takes place behind walls, ceilings, floors, closed
doors, glass partitions, glass doors, or windows.
•
Metal objects (or other reflectors, such as foil faced insulation or water in bottles) can alter the microwave sensor's
protection pattern.
•
Mechanical tampering, masking, painting or spraying of any material on the lenses, windows or any part of the
optical system can reduce the detection ability of the Passive Infrared Motion Detector.
•
Passive Infrared Detectors sense changes in temperature; however, as the ambient temperature of the protected
area approaches the temperature range of 90° to 105°F (32° to 40°C), the detection performance can decrease.
•
The detector will not operate without appropriate DC power connected to it, or if the DC power is improperly con-
nected (i.e., reversed polarity connections).
•
These Detectors, like other electrical devices, are subject to component failure. Even though this equipment is
designed to last as long as 10 years, the electronic components could fail at any time.
We have cited some of the most common reasons that this Motion Detector can fail to catch intrusion. However, this
does not imply that these are the only reasons, and therefore it is recommended that weekly testing of this type of
unit, in conjunction with weekly testing of the entire alarm system, be performed to ensure that the detectors are
working properly.
Installing an alarm system may make the owner eligible for a lower insurance rate, but an alarm system is not a
substitute for insurance. Homeowners, property owners and renters should continue to act prudently in protecting
themselves and continue to insure their lives and property.
We continue to develop new and improved protection devices. Users of alarm systems owe it to themselves and
their loved ones to learn about these developments.
www.PDF-Zoo.com
THE LIMITATIONS OF YOUR MICROWAVE/PASSIVE MOTION
To The Installer
WARNING
DETECTOR
Page 3