AutomationDirect Leadshine EM542S Panduan Memulai Cepat - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Penggerak DC AutomationDirect Leadshine EM542S. AutomationDirect Leadshine EM542S 17 halaman. Stepper drives
Halaman Cetak
Pulse/Direction Mode
DM805-AI
Connection to Differential Signal Controller
DM805-AI
Leadshine Stepper Drives Quick Start Guide – First Edition – 11/04/2019
Controller
COM+
+5V
Run/Stop/Pulse
Direction/+Limit
PUL
Speed/-Limit
Enable/Disable
Signal GND
DIR
+5V Output
0~5V Input
ENABLE
Signal GND
Tach Output
Power GND
+20-80VDC
Motor A+
Motor A-
Motor
Motor B+
Motor B-
R=0 if VCC=5V
R=1K(Power>0.125W) if VCC=12V
R=2K(Power>0.125W) if VCC=24V
R must be connected to control signal terminal
Accel/Ramp
DecelLoSpeed
HiSpeed
COM+
Run/Stop/Pulse
Direction/+Limit
R
Speed/(-)Limit
Enable/Disable
Signal GND
R
+5V Output
0~5V Input
Signal GND
R
Signal GND
Power GND
+20-80VDC
Note: Although the controller has a pair of
Motor A+
differential outputs (+,-), the + output is not
Motor A-
Motor B+
used in this configuration
Motor B-
Leadshine Stepper Drives Quick Start Guide
20-80 VDC
Controller
VCC
PUL+
PUL-
DIR+
DIR-
ENA+
ENA-
Page 13 of 17