DYNANAV Dynaflow 2 Panduan Instalasi dan Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengoperasian untuk Sistem Kontrol DYNANAV Dynaflow 2. DYNANAV Dynaflow 2 15 halaman.

Wiring Harness Diagrams

Overview

The diagrams attached to appendix are for the interconnect wiring of the DynaFlow 2 system. All wires and

connectors on the harnesses are supplied and Mil Specification.

Supplied Parts List

Basic DynaFlow 2 Flow Control system contains: (Optional in brackets is for Standalone

operation and for other GPS manufacturers to interface to the DynaFlow)

Part Number .................................................................................. Description

DynaFlow 2 HMI/ECU ..................... DynaFlow 2 Touchscreen and Electronic Control Unit

DynaFlow 2 Install Harness ........... Installation wiring kit (special for each configuration)

GPS/GLONASS Antenna ............... Antenna with Cable to SMA connector (for standalone)

TDH33CG-00503B004-100 ............. Pressure Transducer, 0-5 VDC, 24 VDC, -5PSI - 100PSI

All other Valves and Flow meters are supplied as per the specifications of the Flow System.

730 – 11731 BAYNES ROAD, PITT MEADOWS, BC, CANADA, V3Y 2B4

WEB PAGE:

www.dynanav.com

SIMPLE BY DESIGN – FLEXIBLE IN APPI\LICATION

PHONE: 604-465-0009

FAX: 604-465-0084