Autonics BYD Series Panduan Produk - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Produk untuk Sensor Keamanan Autonics BYD Series. Autonics BYD Series 5 halaman. Photoelectric sensors with built-in timer

Halaman Cetak

Specifications

Model

BYD3M-TDT-□-□

Sensing type

Through-beam

Sensing distance

3 m

Sensing target

Opaque materials

Min. sensing target ≥ Ø 6 mm

Hysteresis

Response time

≤ 1 ms

Light source

Infrared

Sensitivity

adjustment

Timer function

Operation mode

Dark ON mode

Front

Indicator

Operation indicator (red)

Certification

ᜢ ᜽ ᜨ ᜫ

Unit weight

It depends on the model.

(packaged)

Cable type

≈ 80 g (≈ 105 g)

Cable connector

≈ 40 g (≈ 65 g)

type

01) Non-glossy white paper 50 × 50 mm

02) When the timer adjuster is set to min (0.1 sec).

Power supply

12-24 VDCᜡ ±10 % (ripple P-P: ≤ 10 %)

Current

It depends on the sensing type

consumption

Through-beam

Emitter: ≤ 30 mA, receiver: ≤ 30 mA

Reflective

≤ 35 mA

Through-beam type

: NPN open collector output / PNP open collector output model

Control output

Diffuse reflective, convergent reflective type

: NPN open collector output

Load voltage

≤ 26.4 VDCᜡ

Through-beam type : ≤ 100 mA

Load current

Diffuse reflective, convergent reflective type : ≤ 50 mA

Residual voltage

NPN: ≤ 1 VDCᜡ, PNP: ≤ 2.5 VDCᜡ

Reverse power protection circuit,

Protection circuit

output short overcurrent protection circuit

Insulation

≥ 20 MΩ (500 VDCᜡ megger)

resistance

±240 VDCᜡ the square wave noise (pulse width: 1 ㎲) by the noise

Noise immunity

simulator

Between the charging part and the case: 1,000 VACᜠ 50/60 Hz for 1 min

Dielectric strength

1.5 mm double amplitude at frequency of 10 to 55 Hz

Vibration

in each X, Y, Z direction for 2 hours

Shock

500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times

Ambient

illuminance

Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx

(receiver)

Ambient

-20 to 65 ℃, storage: -25 to 70 ℃ (no freezing or condensation)

temperature

Ambient humidity

35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)

Through-beam, convergent reflective type (front operation indicator

Protection rating

model): IP64 (IEC standard), Others: IP50 (IEC standard)

Connection

Cable type / Connector cable type model

Cable spec.

Ø 3.5 mm, 3-wire (Emitter: 2-wire), 2 m

Wire spec.

AWG26 (0.52 mm, 20-core), insulator outer diameter: Ø 1 mm

Connector spec.

M12 4-pin plug type

Case: PC, sensing part: PC, bracket: SPCC, bolt: SCM, nut: SCM,

Material

sleeve: Brass, Ni-plate

BYD100-DDT-□

BYD□-DDT-□-□

Diffuse reflective

Convergent reflective

10 to 30 mm

10 to 50 mm

100 mm

01)

±10%

01)

Opaque materials,

translucent materials

≤ 25 % of sensing

≤ 10 % of sensing distance

distance

Operation: ≤ 3 ms

Return: ≤ 100 ms

Infrared

YES (Adjuster)

OFF delay mode

: 0.1 to 2 sec (Adjuster)

Light ON mode

Front / Upper operation

Front

indicator model

ᜢ ᜽ ᜨ ᜫ

≈ 38 g (≈ 75 g)

≈ 18 g (≈ 55 g)

Sold Separately: Bracket B

• Unit: mm, For the detailed drawings, follow the Autonics website.

2-R1.6

01)

2-R1.6

21.5

8.8

02)

Sold Separately: Slit for Through-beam Type

■ BYD3M-ST (sticker)

• Unit: mm

9.8

Applied condition

Emitter

Ø 1.0 mm

Ø 1.5 mm

Ø 2.0 mm

Ø 2.5 mm

4-R2.2

4-R0.5

2-R2.2

• Attach this slit at both an emitter and a receiver.

( packaged unit: 2 pieces of each different Ø,

total 8 pieces)

• Gently wipe the dirt on the lens of the sensor

before using it.

• After attaching the slit, remove the front protection

film.

Min. sensing

target

Receiver

≥ Ø 0.8 mm

Opaque materials

≥ Ø 1.5 mm

Opaque materials

○

≥ Ø 2.0 mm

Opaque materials

≥ Ø 2.5 mm

Opaque materials

Max. sensing

distance

500 mm

700 mm

1,200 mm

2,300 mm