Autonnic A5024 Panduan Pengguna dan Instalasi - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna dan Instalasi untuk Kompas Autonnic A5024. Autonnic A5024 19 halaman. Fluxgate compass

Halaman Cetak
Autonnic A5024 Panduan Pengguna dan Instalasi
5.2.10
This command is to read the calibration table values and the response is
in the form of the example shown below:
$TCF0,0000071C0E381554
$TCF1,1C70238C2AA831C4
$TCF2,38E03FFC47184E34
$TCF3,55505C6C63886AA4
$TCF4,71C078DC7FF88714
$TCF5,8E30954C9C68A384
$TCF6,AAA0B1BCB8D8BFF4
$TCF7,C710CE2CD548DC64
5.2.11
Internal filter response
Where nn is the damping value within the range 0 to 99
5.2.12
$PATC,IIHDG,RHO,nnn.n<CR><LF>
Where nnn.n is the heading offset Note that leading zeros are suppressed
eg 0.0
5.2.13
Request the serial number:
A special proprietary reply sentence follows:
$PATC,IIHDG,RID,ssss<CR><LF> where ssss is the serial number in
ASCII decimal.
5.2.14
Read device firmware release
A typical response from a unit is as follows:
$SR,A5024,016,02<CR><LF>
showing the release is 016.
$PATC,IIHDG,RCV<CR><LF>
$PATC,IIHDG,RHD,nn<CR><LF>
$PATC,IIHDG,RHO<CR><LF>
$PATC,IIHDG,RID<CR><LF>
$SR <CR><LF>
18 of 19
A5023/24