Autosaver 88 YA0101A009 Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Aksesori Mobil Autosaver 88 YA0101A009. Autosaver 88 YA0101A009 6 halaman. Bull bar for tacoma 05-15

Halaman Cetak

STEP 5

Connect the two kinds of brackets. There are four groups of mounting hardware

for connecting the Bracket 1 and Bracket 2 as shown. Use the M10 bolts (No. 6),

2 x M10 large washer (No. 7), M10 spring washer (No. 8) and M10 nut (No. 9) in

turn for each mounting hole.

One side

STEP 6

Tighten all the bolts when lining up

well. Check if the bolts are firmly

fixed and the connection is complete.

STEP 7

Wiring the harness of the light bar.

1. Open the front cover of the car (hood cover).

2. Unscrew the bolts of the positive and negative electrodes on the car battery.

3. Arrange the wiring harness from the bottom of the car.

4. Connect the positive and negative poles to the battery, tighten the bolts.

Note :

1. If the light bar doesn't work or keep flashing, check that the positive and negative

connections are correct and stable.

2. If you have any problems on installation, please go back to our product link,

there is a step-by-step installation video to help you.

The other side

- 5 -