AFL FlexScan FS300 Panduan Referensi Cepat - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Peralatan Uji AFL FlexScan FS300. AFL FlexScan FS300 20 halaman. With smartauto and linkmap
Halaman Cetak
Initiate the SmartAuto test by touching
1. FlexScan begins testing with the Live Fiber check and if a live fiber is NOT detected, proceeds to next step.
2. If the Launch Quality check is enabled, FlexScan checks loss and reflectance of the OTDR connection.
3. If launch quality is good, FlexScan starts testing at both wavelengths using SmartAuto settings.
4. When testing is completed, FlexScan displays the LinkMap
OTDR mode.
LinkMap
View Features
®
LinkMap is an icon-based representation of the analyzed network.
File name: consists of cable
name and fiber number, or "New
Trace" if file has not been saved
LinkMap detail view: shows
summary and first 4 events,
or up to 5 events. White
highlighted area in thumbnail
view indicates region of fiber
for which events are shown
in the detail view. Touch
an event icon to see more
details about that event.
Testing in SmartAuto
Start soft key or pressing Start/Stop button.
Link map thumbnail view with
proportionally spaced events
OTDR Mode
®
®
screen, which is a primary display in SmartAuto
x/y or x1-x2/y, where
x = number of the selected event
x1-x2 = link section between events,
y = total events
8
Link Length
Back key: touch to return
to the previous menu
Menu key: touch to
navigate to Save As screen