AFL MLP4-2 Manual

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Uji AFL MLP4-2. AFL MLP4-2 2 halaman. Multimode test kit with wave id and set reference

Halaman Cetak

MLP4-2 Multimode Test Kit with Wave ID and Set Reference

Features

•

Hand-held, rugged, lightweight

•

Wave ID (auto identification and switching)

•

Dual or single Wave ID, CW

•

Large LCD with backlight (OPM4-2D)

•

Power measurements in dBm or μW; insertion loss in dB

•

Reference power level storage

•

Low battery indicator

•

Long battery life with 2 x AA alkaline

•

Free 50μm and 62.5μm mandrels

•

Cost-effective, easy-to-use

•

N.I.S.T traceable

www.AFLglobal.com or 1.800.321.5298 / 1.603.528.7780

The MLP4-2 test kit combines the OPM4-2D optical power meter

and OLS1-Dual LED light source and is ideally suited for testing

multimode fiber optic networks.

The OLS1-Dual features 850 and 1300 nm LED output from

a single output port and is easy to operate with only a power

button and a wavelength select button. Each wavelength may be

transmitted individually at CW or with Wave ID. When transmitting

with Wave ID, the OLS1-Dual supports transmitting pairs of

wavelengths in an alternating pattern. Associated with each

operating condition, the designated LED indicator will illuminate

to identify the currently enabled operating mode and emitted

wavelength(s) along with battery charge status and external power

presence. The OLS1-Dual output port is equipped with UCI based

removable adapters to allow the output connectors to be inspected

and cleaned.

When used with the OLS1-Dual, the OPM4-2D offers automatic

wavelength identification and switching - Wave ID feature that

automatically detects and sets the wavelength(s), preventing

setup and measurement errors. It significantly increases efficiency

and reduces technician errors—and saves testing time—by

eliminating the need to test each wavelength individually. The

OPM4-2D stores optical references for each calibrated wavelength

and offers multiple test tone detection for fiber identification. The

OPM4-2D optical input port accepts a variety of Noyes thread-on

style adapter caps (ordered separately) to meet a wide range of

testing requirements.

The MLP4-2 test kit is fully N.I.S.T. traceable.

Applications

•

Certify multimode fiber links per TIA/EIA standards

•

The 1300 nm output can also be used to test short distance (up

to 10 km) single-mode fiber links

Specifications are subject to change without notice.