Majacraft Suzie Professional Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Roda Berputar Majacraft Suzie Professional. Majacraft Suzie Professional 12 halaman.
Juga untuk Majacraft Suzie Professional: Manual (12 halaman)

Halaman Cetak

Remove the handle nut and then slide the drive wheel out of the SHDW assembly. Place the handle

and nut to one side. There is a small star washer on the drive shaft, take care it does not drop off

when you remove the drive wheel or remain stuck to the black acetyl bush.

Turn the handle assembly over so the small threaded hole near the handle pivot is on the bottom and

position the handle so it makes a 90 degree angle between the stem and handle. Using the T-wrench,

carefully screw the 25mm JCB bolt in until it is tight.

Check the star washer is still on the drive shaft. Now slide the drive

wheel and drive shaft back into the stem/handle assembly. When

the drive shaft is in place then screw the front handle nut on and

tighten it up.

majacraft