Airflow Hi-flow 2L Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Alat Ukur Airflow Hi-flow 2L. Airflow Hi-flow 2L 14 halaman.

The pump is designed to sit level on its base or to be fixed to a vertical surface. A

spirit level is built in to the pump's casing to aid levelling the pump. x2 screw

holes are provided in the back plate of the pump for fixture to a vertical

surface.

This pump is designed for installation indoors only. Do not position this pump where it

is likely to be subject to water ingress.

The discharge pipe can be 6mm or 10mm ID. It should be secured to the outlet barb

using the cable ties provided. It is important to ensure that there are no kinks or

restrictions in the discharge pipe.

Three openings are provided for inlet of condensate water at the front of the pump,

two on the right hand side and one on the left. The inlet pipe/s must be fitted so

that it/they push/es fully into one of the openings and cannot come loose.