IKEA LAGAN Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Kap Ventilasi IKEA LAGAN. IKEA LAGAN 24 halaman. Examples of the load of the basket
Juga untuk IKEA LAGAN: Manual Petunjuk Perakitan (8 halaman), Panduan Pengguna (20 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (20 halaman), Petunjuk Manual (48 halaman), Panduan Pengguna (16 halaman), Panduan Pengguna (24 halaman), Manual (28 halaman), Buku Petunjuk (24 halaman), Panduan Pengguna (24 halaman), Manual (4 halaman), Panduan Pengguna (12 halaman), Manual (24 halaman), Manual Petunjuk Perakitan (20 halaman), Panduan Instalasi (20 halaman), Manual (28 halaman), Manual (32 halaman), Manual (44 halaman), Manual (16 halaman), Manual (16 halaman), Manual (24 halaman), Manual (28 halaman), Manual (28 halaman), Panduan Pengguna (28 halaman), Manual (40 halaman), Manual (48 halaman), Panduan Penggunaan & Perawatan (25 halaman), Manual (44 halaman), Manual (40 halaman), Manual (28 halaman), Manual (28 halaman), Panduan Pengguna (24 halaman), Manual (48 halaman), Panduan Pengguna (16 halaman), Panduan Petunjuk Instalasi (18 halaman), Manual (48 halaman), Panduan Memulai Cepat (4 halaman), Panduan Petunjuk Instalasi (16 halaman), Manual (28 halaman), Manual (28 halaman), Manual (44 halaman), Manual (48 halaman), Manual (16 halaman), Manual (32 halaman), Manual (24 halaman), Manual (25 halaman), Manual (18 halaman), Panduan Pengguna (28 halaman), Manual (44 halaman), Manual (24 halaman), Manual (32 halaman), Manual (18 halaman), Manual (48 halaman), Manual (29 halaman), Manual (29 halaman), Manual (34 halaman), Panduan Petunjuk Instalasi (42 halaman)

Halaman Cetak

ENGLISH

What to do if ...

Service instructions

Service and maintenance is only to be

carried out by an authorised person.

To replace parts such as burners, valve

and electric components, the hotplate

must be removed from the bench top by

releasing the attachment hooks, loosening

the attachment screws of each burner,

unscrewing the hotplate attachments nuts

which are visible at the bottom of the

Problem

The electric ignition

does not work

The burner fails to ignite

The gas ring burns

unevenly or flame is not

even.

Possible cause

There is no electrical supply

The gas tap could be closed

- Not pressing down the

ignition knob long enough

- Gas cylinder (liquid gas) is

empty

- Burner openings clogged or

dirty

- Burner parts not positioning

correctly.

- Draughts near the hob

- Minimum gas setting and

injector sizing is incorrect

surface, removing the hotplate top, taking

care to remove lid taps and screws under

them and finally replacing the defective

parts.

Note: If the valves must be replaced, first

disassemble the chain of ignition switches.

It is recommended to replace the valve

gaskets each time the valve is replaced, thus

ensuring a perfect seal between the body

and the gas train.

Solution

Check the unit is plugged in

and the electrical supply is

switched on.

Check that the gas tap is

open

- When lighting the burner,

the knob has been pressed

down for enough time to

allow activating the protection

device.

-Check that the gas or

electrical supplies are not shut

off and especially that the gas

supply tap is open.

- Check that the gas cylinder

(liquid gas) is not empty.

Replace is empty.

- Clean the burner openings

and plug end

- Check all burner parts have

been positioned correctly.

- Check there are no

draughts near the hob.

- Check minimum gas setting

& injector (see relevant

paragraphs)